Die Sonderaustellung „Friedrich Sulzer“

Die Sonderaustellung „Friedrich Sulzer“ , Schreiner, Designer, Hochschullehrer und die ständige Ausstellung „Designobjekte 20. Jahrhunderts“ sind nur noch bis zum 9. Juni geöffnet (freitags und samstags von 14 bis 18 Uhr).Ab 27. Juli bis Ende Oktober können diese Ausstellungen von Gruppen nach Terminvereinbarung besucht werden.

despreis_plakat.jpg

ACHTUNG: ständige Ausstellung: Designobjekte des 20. Jhdts.

Unsere ständige Ausstellung Designobjekte des 21. Jahrhunderts ist in leicht reduziertem Umfang weiterhin zu sehen …

SONDERAUSSTELLUNG Karl Sulzer Skulpturen im Juli 2007

Aus Anlaß des 110. Geburtstages zeigen wir die Sonderausstellung Karl Sulzer Skulpturen ab 27. Juli 2007 im renovierten, historischen Gewölbekeller …

SONDERAUSSTELLUNG Friedrich Sulzer (1962 – 2000) im März 2007

Ab 10. März 2007, 17 Uhr, zeigen wir die Sonderausstellung Friedrich Sulzer: Schreiner, Designer, Hochschullehrer 81962 – 2000). Es werden bisher noch nicht gezeigte Möbel neben seinen bekannten Möbeln für newcraft gezeigt …

Im November und Dezember 2006 bereiten wir die nächsten Ausstellung vor, die wir 2007 zeigen werden. Deshalb haben wir geschlossen.

Im November und Dezember 2006 bereiten wir die nächsten Ausstellung vor, die wir 2007 zeigen werden. Deshalb haben wir geschlossen.

Preisträger “TWO by ONE” auf der Kölner Möbelmesse: Halle 1.1 Stand A 040 !

Vom 15. bis 21. Januar haben wir einen Stand auf der Internationalen Messe in Köln. Wir zeigen die Prototypen der Preisträger im von uns veranstalteten International Design Award „Two by One“; die Prototypen werden zur Zeit hergestellt. Die vier Preise gingen an Teilnehmer aus der Schweiz, Polen, den USA und Deutschland. Der Stand: A 040 in Halle 1.1

Ausstellung “Steine des Gedenkens” – Begegnungen um das jüdische Erbe Elsass/Pfalz – wird ab 10. September in Rülzheim gezeigt.

Die Ausstellung „Steine des Gedenkens“ – Begegnungen um das jüdische Erbe Elsass/Pfalz wird ab 10. September in Rülzheim gezeigt.Dieses gemeinsame Projekt des Musée Judéo- Alsacien und der Stiftung Simonshof steht unter der Schirmherrschaft von Ministerpräsident Kurt Beck und des Präsidenten der Region Elsass Adrien Zeller; es wird von der Eidgenossenschaft im Rahmen des Projektes „Begegnungen am Oberrhein“ unterstützt.Nachdem die Ausstellung zunächst im Elsass gezeigt wurde, wird sie nun in Rülzheim am Sonntag, den 10. September um 15 Uhr in der ehemaligen Synagoge – Gedenkstätte und Begegnungszentrum, Kuntzengasse 3-5 eröffnet.Karsten und Angelika Krutz spielen Musik jüdischer Komponisten. In der Ausstellung werden Farbfotos von Erika Sulzer-Kleinemeier und dem Ehepaar Heinz gezeigt, dazu Arbeiten über die jüdischen Friedhöfe von Studenten und Schülern, sowie Arbeiten zum Thema Shoah.Am Samstag, den 16. September hält der Autor Otmar Weber um 19 Uhr einen Lichtbildervortrag über die Synagogen in der Pfalz im Rahmen der Ausstellung.Am Sonntag, den 17. September kommen die elsässischen Partner zu einer Besichtigungsfahrt (Ausstellung, Friedhöfe in Rülzheim und Essingen, rituelles Bad in Speyer). Anmeldungen bei der Stiftung Simonshof Tel.: 06345 / 7483In Abänderung von früheren Ankündigungen (Einladungen, Plakaten) ist die Ausstellung nur vom 10. Sept. bis 3. Okt. täglich (ausser montags) von 15 bis 18 Uhr geöffnet (der Eintritt ist frei). Gruppen nach Vereinbarung (Tel.: 06345 / 7483).

International design Award “Two by One”

Report of the decision taken by the jury on 22.05.2006 at the Stiftung Simonshof Gleisweiler / Germany.By March 15. 2006 we had received 38 entries from nine countries (Austria, Germany, Canada, India, Switzerland, USA, Italy, the Netherlands, Slovak Republik and the UK).The Pre-selection-Comittee (A.Hack, Martin Büdel, Wolfgang Kreser of …4!) had screened all the entries and presented them to the jury (Ron Arad, Axel Kufus, Ludger Hovestadt, Dirk Fischer). The jury meeting opened at 9 a.m.on May 26. 2006. Axel Kufus elected as chairman. All entries were discussed and juged by the jury.The short list included:Michael Blomeier (D),Katja Schoelzig (D),Pascal Heinz (D),Louis Gric (USA),Oskar Zieta (PL),Thorsten Klocke (D),Philipp Pelz (D),Sibylle Pfeiffer (D),Stefan Stauffacher (CH)and Bhaya Kamalia (India).After long and detailed dicussion the jury decided to award the prizes to:The 2X1 CNC Prize in lingenious material (625,- €) to Thorsten Klocke (D)The 2X1 CNC Prize in metal sheet (625,- €) to Stefan Stauffacher (CH)The Friedrich Sulzer Special Award “innovation in using cnc technology” using metal sheet (625,- €) to Oskar Zieta (PL)The Friedrich Sulzer Special Award “innovation in using cnc technology” using lingenious material (625,- €) to Louis Gric (USA)The jury asks the winners to send an updated CD to Stiftung Simonshof to facilitate the transfer of the designs to the manufacturers of the prototypes.The design object will be published and exhibited at the International Furniture Fair (IMM) Cologne 2007.Gleisweiler 22.05.2006

International Design Award “Two by One”

Report of the decision taken by the jury on 22.05.2006 at the Stiftung Simonshof Gleisweiler / Germany.By March 15. 2006 we had received 38 entries from nine countries (Austria, Germany, Canada, India, Switzerland, USA, Italy, the Netherlands, Slovak Republik and the UK).The Pre-selection-Comittee (A.Hack, Martin Büdel, Wolfgang Kreser of …4!) had screened all the entries and presented them to the jury (Ron Arad, Axel Kufus, Ludger Hovestadt, Dirk Fischer). The jury meeting opened at 9 a.m.on May 26. 2006. Axel Kufus elected as chairman. All entries were discussed and juged by the jury. The short list included:Michael Blomeier (D), Katja Schoelzig (D), Pascal Heinz (D), Louis Gric (USA), Oskar Zieta (PL), Thorsten Klocke (D), Philipp Pelz (D), Sibylle Pfeiffer (D), Stefan Stauffacher (CH) and Bhaya Kamalia (India).After long and detailed dicussion the jury decided to award the prizes to:The 2X1 CNC Prize in lingenious material (625,- €) to Thorsten Klocke (D) The 2X1 CNC Prize in metal sheet (625,- €) to Stefan Stauffacher (CH)The Friedrich Sulzer Special Award “innovation in using cnc technology” using metal sheet (625,- €) to Oskar Zieta (PL)The Friedrich Sulzer Special Award “innovation in using cnc technology” using lingenious material (625,- €) to Louis Gric (USA)The jury asks the winners to send an updated CD to Stiftung Simonshof to facilitate the transfer of the designs to the manufacturers of the prototypes.The design object will be published and exhibited at the International Furniture Fair (IMM) Cologne 2007.Gleisweiler 22.05.2006

International Design Award “Two by One”

International Design Award“Two by One“After the successful Friedrich Sulzer Prize in 2002 and the workshop „Parameter“ in 2004, Stiftung Simonshof Design Museum, a nonprofit foundation, invites designers to participate in this international design competition. Entries should be furniture designs in digital form that can be realised economically on CNC machines on the basis of a sheet 2 x 1 m or 8 x 4 feet, either metal or ligneous.TimetableAutumn 2005AnnouncementMarch 15th 2006final date for entriesSpring 2006Short-ListingSummer 2006Jury decision and realisation of prototypesJanuary 2007Exhibition at the International Furniture Fair (IMM), CologneEntries are invited from designers, craftsmen, students …Competitors must provide a signed statement that they are the author(s) of the submitted design and that they cede the rights to exhibit and publish the results, including the name of the author(s).Jury:Ron Arad (London), Prof. Axel Kufus (Berlin), Prof. Ludger Hovestadt (Zürich), Dirk Fischer (Neustadt).One Prize“2×1 CNC award“ design in ligneous material1.000,- EuroOne Prize“2×1 CNC award“ design in metal sheet1.000,- EuroFriedrich Sukzer special award:innovation in using CNC technologies500,- EuroPrototypes of the winning designs will be made by our foundation and firms working with us.Outline specification:This competition invites designers to engage in the field of digital furniture design and manufacture. The entries must be in digital form (.dxf and .pdf), to facilitate the transfer of ideas and data between designer and manufacturer without personal communication; to ensure this the „language“ of the entry is am essemtial element of the design.The design should use the potential of digital technologies in an intelligent way. Good design is as important as considerations of production and cost.Summary:CNC technology is well stablished in the field of metal and ligneous sheet and is mostly used for standard forms that do not challenge the real potential of such technology. The competition aims to promote good furniture design that makes use of this potential.The firms selected to realise the award winning designs will be specially chosen on the requirements of each design.Entries should be sent to the promoter:Stiftung Simonshof, Hauptstrasse 7 D 76835 GleisweilerOrganisation: …4, Neuwerk 7, D 06108 Halle/SaaleTel.: +49 345 7751.892, email: info@dreipunkt4.de